Functions for Searching in Strings

All functions in this section search case-sensitively by default. Case-insensitive search is usually provided by separate function variants.

Note

Case-insensitive search follows the lowercase-uppercase rules of the English language. E.g. Uppercased i in the English language is I whereas in the Turkish language it is İ - results for languages other than English may be unexpected.

Functions in this section also assume that the searched string (referred to in this section as haystack) and the search string (referred to in this section as needle) are single-byte encoded text. If this assumption is violated, no exception is thrown and results are undefined. Search with UTF-8 encoded strings is usually provided by separate function variants. Likewise, if a UTF-8 function variant is used and the input strings are not UTF-8 encoded text, no exception is thrown and the results are undefined. Note that no automatic Unicode normalization is performed, however you can use the normalizeUTF8*() functions for that.

General strings functions and functions for replacing in strings are described separately.

Note

The documentation below is generated from the system.functions system table.

countMatches

Introduced in: v21.1

Returns number of matches of a regular expression in a string.

Version dependent behavior

The behavior of this function depends on the ClickHouse version:

in versions < v25.6, the function stops counting at the first empty match even if a pattern accepts.
in versions >= 25.6, the function continues execution when an empty match occurs. The legacy behavior can be restored using setting count_matches_stop_at_empty_match = true;

Syntax

countMatches(haystack, pattern)

Arguments

haystack — The string to search in. String
pattern — Regular expression pattern. String

Returned value

Returns the number of matches found. UInt64

Examples

Count digit sequences

SELECT countMatches('hello 123 world 456 test', '[0-9]+')

┌─countMatches('hello 123 world 456 test', '[0-9]+')─┐
│                                                   2 │
└─────────────────────────────────────────────────────┘

countMatchesCaseInsensitive

Introduced in: v21.1

Like countMatches but performs case-insensitive matching.

Syntax

countMatchesCaseInsensitive(haystack, pattern)

Arguments

haystack — The string to search in. String
pattern — Regular expression pattern. const String

Returned value

Returns the number of matches found. UInt64

Examples

Case insensitive count

SELECT countMatchesCaseInsensitive('Hello HELLO world', 'hello')

┌─countMatchesCaseInsensitive('Hello HELLO world', 'hello')─┐
│                                                         2 │
└───────────────────────────────────────────────────────────┘

countSubstrings

Introduced in: v21.1

Returns how often a substring needle occurs in a string haystack.

Syntax

countSubstrings(haystack, needle[, start_pos])

Arguments

haystack — String in which the search is performed. String or Enum. - needle — Substring to be searched. String. - start_pos — Position (1-based) in haystack at which the search starts. UInt. Optional.

Returned value

The number of occurrences. UInt64

Examples

Usage example

SELECT countSubstrings('aaaa', 'aa');

┌─countSubstrings('aaaa', 'aa')─┐
│                             2 │
└───────────────────────────────┘

With start_pos argument

SELECT countSubstrings('abc___abc', 'abc', 4);

┌─countSubstrings('abc___abc', 'abc', 4)─┐
│                                      1 │
└────────────────────────────────────────┘

countSubstringsCaseInsensitive

Introduced in: v21.1

Like countSubstrings but counts case-insensitively.

Syntax

countSubstringsCaseInsensitive(haystack, needle[, start_pos])

Arguments

haystack — String in which the search is performed. String or Enum
needle — Substring to be searched. String
start_pos — Optional. Position (1-based) in haystack at which the search starts. UInt*

Returned value

Returns the number of occurrences of the neddle in the haystack. UInt64

Examples

Usage example

SELECT countSubstringsCaseInsensitive('AAAA', 'aa');

┌─countSubstri⋯AAA', 'aa')─┐
│                        2 │
└──────────────────────────┘

With start_pos argument

SELECT countSubstringsCaseInsensitive('abc___ABC___abc', 'abc', 4);

┌─countSubstri⋯, 'abc', 4)─┐
│                        2 │
└──────────────────────────┘

countSubstringsCaseInsensitiveUTF8

Introduced in: v21.1

Like countSubstrings but counts case-insensitively and assumes that haystack is a UTF-8 string.

Syntax

countSubstringsCaseInsensitiveUTF8(haystack, needle[, start_pos])

Arguments

haystack — UTF-8 string in which the search is performed. String or Enum
needle — Substring to be searched. String
start_pos — Optional. Position (1-based) in haystack at which the search starts. UInt*

Returned value

Returns the number of occurrences of the needle in the haystack. UInt64

Examples

Usage example

SELECT countSubstringsCaseInsensitiveUTF8('ложка, кошка, картошка', 'КА');

┌─countSubstri⋯шка', 'КА')─┐
│                        4 │
└──────────────────────────┘

With start_pos argument

SELECT countSubstringsCaseInsensitiveUTF8('ложка, кошка, картошка', 'КА', 13);

┌─countSubstri⋯, 'КА', 13)─┐
│                        2 │
└──────────────────────────┘

extract

Introduced in: v1.1

Extracts the first match of a regular expression in a string. If 'haystack' doesn't match 'pattern', an empty string is returned.

This function uses the RE2 regular expression library. Please refer to re2 for supported syntax.

If the regular expression has capturing groups (sub-patterns), the function matches the input string against the first capturing group.

Syntax

extract(haystack, pattern)

Arguments

haystack — String from which to extract. String
pattern — Regular expression, typically containing a capturing group. const String

Returned value

Returns extracted fragment as a string. String

Examples

Extract domain from email

SELECT extract('test@clickhouse.com', '.*@(.*)$')

┌─extract('test@clickhouse.com', '.*@(.*)$')─┐
│ clickhouse.com                            │
└───────────────────────────────────────────┘

No match returns empty string

SELECT extract('test@clickhouse.com', 'no_match')

┌─extract('test@clickhouse.com', 'no_match')─┐
│                                            │
└────────────────────────────────────────────┘

extractAll

Introduced in: v1.1

Like extract, but returns an array of all matches of a regular expression in a string. If 'haystack' doesn't match the 'pattern' regex, an empty array is returned.

If the regular expression has capturing groups (sub-patterns), the function matches the input string against the first capturing group.

Syntax

extractAll(haystack, pattern)

Arguments

haystack — String from which to extract fragments. String
pattern — Regular expression, optionally containing capturing groups. const String

Returned value

Returns array of extracted fragments. Array(String)

Examples

Extract all numbers

SELECT extractAll('hello 123 world 456', '[0-9]+')

┌─extractAll('hello 123 world 456', '[0-9]+')─┐
│ ['123','456']                               │
└─────────────────────────────────────────────┘

Extract using capturing group

SELECT extractAll('test@example.com, user@domain.org', '([a-zA-Z0-9]+)@')

┌─extractAll('test@example.com, user@domain.org', '([a-zA-Z0-9]+)@')─┐
│ ['test','user']                                                    │
└────────────────────────────────────────────────────────────────────┘

extractAllGroupsHorizontal

Introduced in: v20.5

Matches all groups of a string using the provided regular expression and returns an array of arrays, where each array contains all captures from the same capturing group, organized by group number.

Syntax

extractAllGroupsHorizontal(s, regexp)

Arguments

s — Input string to extract from. String or FixedString
regexp — Regular expression to match by. const String or const FixedString

Returned value

Returns an array of arrays, where each inner array contains all captures from one capturing group across all matches. The first inner array contains all captures from group 1, the second from group 2, etc. If no matches are found, returns an empty array. Array(Array(String))

Examples

Usage example

WITH '< Server: nginx
< Date: Tue, 22 Jan 2019 00:26:14 GMT
< Content-Type: text/html; charset=UTF-8
< Connection: keep-alive
' AS s
SELECT extractAllGroupsHorizontal(s, '< ([\\w\\-]+): ([^\\r\\n]+)');

[['Server','Date','Content-Type','Connection'],['nginx','Tue, 22 Jan 2019 00:26:14 GMT','text/html; charset=UTF-8','keep-alive']]

extractGroups

Introduced in: v20.5

Extracts all groups from non-overlapping substrings matched by a regular expression.

Syntax

extractAllGroups(s, regexp)

Arguments

s — Input string to extract from. String or FixedString
regexp — Regular expression. Constant. const String or const FixedString

Returned value

If the function finds at least one matching group, it returns Array(Array(String)) column, clustered by group_id (1 to N, where N is number of capturing groups in regexp). If there is no matching group, it returns an empty array. Array(Array(String))

Examples

Usage example

WITH '< Server: nginx
< Date: Tue, 22 Jan 2019 00:26:14 GMT
< Content-Type: text/html; charset=UTF-8
< Connection: keep-alive
' AS s
SELECT extractAllGroups(s, '< ([\\w\\-]+): ([^\\r\\n]+)');

[['Server','nginx'],['Date','Tue, 22 Jan 2019 00:26:14 GMT'],['Content-Type','text/html; charset=UTF-8'],['Connection','keep-alive']]

hasAllTokens

Introduced in: v25.7

Like hasAnyTokens, but returns 1, if all tokens in the needle string or array match the input string, and 0 otherwise. If input is a column, returns all rows that satisfy this condition.

Note

Column input should have a text index defined for optimal performance. If no text index is defined, the function performs a brute-force column scan which is orders of magnitude slower than an index lookup.

Prior to searching, the function tokenizes

the input argument (always), and
the needle argument (if given as a String) using the tokenizer specified for the text index. If the column has no text index defined, the splitByNonAlpha tokenizer is used instead. If the needle argument is of type Array(String), each array element is treated as a token — no additional tokenization takes place.

Duplicate tokens are ignored. For example, needles = ['ClickHouse', 'ClickHouse'] is treated the same as ['ClickHouse'].

Syntax

hasAllTokens(input, needles)

Aliases: hasAllToken

Arguments

input — The input column. String or FixedString
needles — Tokens to be searched. Supports at most 64 tokens. String or Array(String)

Returned value

Returns 1, if all needles match. 0, otherwise. UInt8

Examples

Usage example

CREATE TABLE table (
    id UInt32,
    msg String,
    INDEX idx(msg) TYPE text(tokenizer = splitByString(['()', '\\']))
)
ENGINE = MergeTree
ORDER BY id;

INSERT INTO table VALUES (1, '()a,\\bc()d'), (2, '()\\a()bc\\d'), (3, ',()a\\,bc,(),d,');

SELECT count() FROM table WHERE hasAllTokens(msg, 'a\\d()');

┌─count()─┐
│       1 │
└─────────┘

Specify needles to be searched for AS-IS (no tokenization) in an array

SELECT count() FROM table WHERE hasAllTokens(msg, ['a', 'd']);

┌─count()─┐
│       1 │
└─────────┘

Generate needles using the tokens function

SELECT count() FROM table WHERE hasAllTokens(msg, tokens('a()d', 'splitByString', ['()', '\\']));

┌─count()─┐
│       1 │
└─────────┘

hasAnyTokens

Introduced in: v25.7

Returns 1, if at least one token in the needle string or array matches the input string, and 0 otherwise. If input is a column, returns all rows that satisfy this condition.

Note

Prior to searching, the function tokenizes

the input argument (always), and
the needle argument (if given as a String) using the tokenizer specified for the text index. If the column has no text index defined, the splitByNonAlpha tokenizer is used instead. If the needle argument is of type Array(String), each array element is treated as a token — no additional tokenization takes place.

Duplicate tokens are ignored. For example, ['ClickHouse', 'ClickHouse'] is treated the same as ['ClickHouse'].

Syntax

hasAnyTokens(input, needles)

Aliases: hasAnyToken

Arguments

input — The input column. String or FixedString
needles — Tokens to be searched. Supports at most 64 tokens. String or Array(String)

Returned value

Returns 1, if there was at least one match. 0, otherwise. UInt8

Examples

Usage example

CREATE TABLE table (
    id UInt32,
    msg String,
    INDEX idx(msg) TYPE text(tokenizer = splitByString(['()', '\\']))
)
ENGINE = MergeTree
ORDER BY id;

INSERT INTO table VALUES (1, '()a,\\bc()d'), (2, '()\\a()bc\\d'), (3, ',()a\\,bc,(),d,');

SELECT count() FROM table WHERE hasAnyTokens(msg, 'a\\d()');

┌─count()─┐
│       3 │
└─────────┘

Specify needles to be searched for AS-IS (no tokenization) in an array

SELECT count() FROM table WHERE hasAnyTokens(msg, ['a', 'd']);

┌─count()─┐
│       3 │
└─────────┘

Generate needles using the tokens function

SELECT count() FROM table WHERE hasAnyTokens(msg, tokens('a()d', 'splitByString', ['()', '\\']));

┌─count()─┐
│       3 │
└─────────┘

hasSubsequence

Introduced in: v23.7

Checks if a needle is a subsequence of a haystack. A subsequence of a string is a sequence that can be derived from another string by deleting some or no characters without changing the order of the remaining characters.

Syntax

hasSubsequence(haystack, needle)

Arguments

haystack — String in which to search for the subsequence. String
needle — Subsequence to be searched. String

Returned value

Returns 1 if needle is a subsequence of haystack, 0 otherwise. UInt8

Examples

Basic subsequence check

SELECT hasSubsequence('Hello World', 'HlWrd')

┌─hasSubsequence('Hello World', 'HlWrd')─┐
│                                      1 │
└────────────────────────────────────────┘

No subsequence found

SELECT hasSubsequence('Hello World', 'xyz')

┌─hasSubsequence('Hello World', 'xyz')─┐
│                                    0 │
└──────────────────────────────────────┘

hasSubsequenceCaseInsensitive

Introduced in: v23.7

Like hasSubsequence but searches case-insensitively.

Syntax

hasSubsequenceCaseInsensitive(haystack, needle)

Arguments

haystack — String in which the search is performed. String
needle — Subsequence to be searched. String

Returned value

Returns 1, if needle is a subsequence of haystack, 0 otherwise. UInt8

Examples

Usage example

SELECT hasSubsequenceCaseInsensitive('garbage', 'ARG');

┌─hasSubsequenceCaseInsensitive('garbage', 'ARG')─┐
│                                               1 │
└─────────────────────────────────────────────────┘

hasSubsequenceCaseInsensitiveUTF8

Introduced in: v23.7

Like hasSubsequenceUTF8 but searches case-insensitively.

Syntax

hasSubsequenceCaseInsensitiveUTF8(haystack, needle)

Arguments

haystack — UTF8-encoded string in which the search is performed. String
needle — UTF8-encoded subsequence string to be searched. String

Returned value

Returns 1, if needle is a subsequence of haystack, 0 otherwise. UInt8

Examples

Usage example

SELECT hasSubsequenceCaseInsensitiveUTF8('ClickHouse - столбцовая система управления базами данных', 'СИСТЕМА');

┌─hasSubsequen⋯ 'СИСТЕМА')─┐
│                        1 │
└──────────────────────────┘

hasSubsequenceUTF8

Introduced in: v23.7

Like hasSubsequence but assumes haystack and needle are UTF-8 encoded strings.

Syntax

hasSubsequenceUTF8(haystack, needle)

Arguments

haystack — The string in which to search. String
needle — The subsequence to search for. String

Returned value

Returns 1 if needle is a subsequence of haystack, otherwise 0. UInt8

Examples

Usage example

SELECT hasSubsequenceUTF8('картошка', 'кошка');

┌─hasSubsequen⋯', 'кошка')─┐
│                        1 │
└──────────────────────────┘

Non-matching subsequence

SELECT hasSubsequenceUTF8('картошка', 'апельсин');

┌─hasSubsequen⋯'апельсин')─┐
│                        0 │
└──────────────────────────┘

hasToken

Introduced in: v20.1

Checks if the given token is present in the haystack.

A token is defined as the longest possible sub-sequence of consecutive characters [0-9A-Za-z_], i.e. numbers, ASCII letters and underscore.

Syntax

hasToken(haystack, token)

Arguments

haystack — String to be searched. String
token — Token to search for. const String

Returned value

Returns 1 if the token is found, 0 otherwise. UInt8

Examples

Token search

SELECT hasToken('clickhouse test', 'test')

┌─hasToken('clickhouse test', 'test')─┐
│                                   1 │
└─────────────────────────────────────┘

hasTokenCaseInsensitive

Introduced in: v

Performs case insensitive lookup of needle in haystack using tokenbf_v1 index.

Syntax

Arguments

None.

Returned value

Examples

hasTokenCaseInsensitiveOrNull

Introduced in: v

Performs case insensitive lookup of needle in haystack using tokenbf_v1 index. Returns null if needle is ill-formed.

Syntax

Arguments

None.

Returned value

Examples

hasTokenOrNull

Introduced in: v20.1

Like hasToken but returns null if token is ill-formed.

Syntax

hasTokenOrNull(haystack, token)

Arguments

haystack — String to be searched. Must be constant. String
token — Token to search for. const String

Returned value

Returns 1 if the token is found, 0 otherwise, null if token is ill-formed. Nullable(UInt8)

Examples

Usage example

SELECT hasTokenOrNull('apple banana cherry', 'ban ana');

┌─hasTokenOrNu⋯ 'ban ana')─┐
│                     ᴺᵁᴸᴸ │
└──────────────────────────┘

ilike

Introduced in: v20.6

Like like but searches case-insensitively.

Syntax

ilike(haystack, pattern)
-- haystack ILIKE pattern

Arguments

haystack — String in which the search is performed. String or FixedString
pattern — LIKE pattern to match against. String

Returned value

Returns 1 if the string matches the LIKE pattern (case-insensitive), otherwise 0. UInt8

Examples

Usage example

SELECT ilike('ClickHouse', '%house%');

┌─ilike('ClickHouse', '%house%')─┐
│                              1 │
└────────────────────────────────┘

like

Introduced in: v1.1

Returns whether string haystack matches the LIKE expression pattern.

A LIKE expression can contain normal characters and the following metasymbols:

% indicates an arbitrary number of arbitrary characters (including zero characters).
_ indicates a single arbitrary character.
\ is for escaping literals %, _ and \.

Matching is based on UTF-8, e.g. _ matches the Unicode code point ¥ which is represented in UTF-8 using two bytes.

If the haystack or the LIKE expression are not valid UTF-8, the behavior is undefined.

No automatic Unicode normalization is performed, you can use the normalizeUTF8* functions for that.

To match against literal %, _ and \ (which are LIKE metacharacters), prepend them with a backslash: \%, \_ and \\. The backslash loses its special meaning (i.e. is interpreted literally) if it prepends a character different than %, _ or \.

Note

ClickHouse requires backslashes in strings to be quoted as well, so you would actually need to write \\%, \\_ and \\\\.

For LIKE expressions of the form %needle%, the function is as fast as the position function. All other LIKE expressions are internally converted to a regular expression and executed with a performance similar to function match.

Syntax

like(haystack, pattern)
-- haystack LIKE pattern

Arguments

haystack — String in which the search is performed. String or FixedString
pattern — LIKE pattern to match against. Can contain % (matches any number of characters), _ (matches single character), and \ for escaping. String

Returned value

Returns 1 if the string matches the LIKE pattern, otherwise 0. UInt8

Examples

Usage example

SELECT like('ClickHouse', '%House');

┌─like('ClickHouse', '%House')─┐
│                            1 │
└──────────────────────────────┘

Single character wildcard

SELECT like('ClickHouse', 'Click_ouse');

┌─like('ClickH⋯lick_ouse')─┐
│                        1 │
└──────────────────────────┘

Non-matching pattern

SELECT like('ClickHouse', '%SQL%');

┌─like('ClickHouse', '%SQL%')─┐
│                           0 │
└─────────────────────────────┘

locate

Introduced in: v18.16

Like position but with arguments haystack and locate switched.

Version dependent behavior

The behavior of this function depends on the ClickHouse version:

in versions < v24.3, locate was an alias of function position and accepted arguments (haystack, needle[, start_pos]).
in versions >= 24.3, locate is an individual function (for better compatibility with MySQL) and accepts arguments (needle, haystack[, start_pos]). The previous behavior can be restored using setting function_locate_has_mysql_compatible_argument_order = false.

Syntax

locate(needle, haystack[, start_pos])

Arguments

needle — Substring to be searched. String
haystack — String in which the search is performed. String or Enum
start_pos — Optional. Position (1-based) in haystack at which the search starts. UInt

Returned value

Returns starting position in bytes and counting from 1, if the substring was found, 0, if the substring was not found. UInt64

Examples

Basic usage

SELECT locate('ca', 'abcabc')

┌─locate('ca', 'abcabc')─┐
│                      3 │
└────────────────────────┘

match

Introduced in: v1.1

Checks if a provided string matches the provided regular expression pattern.

This function uses the RE2 regular expression library. Please refer to re2 for supported syntax.

Matching works under UTF-8 assumptions, e.g. ¥ uses two bytes internally but matching treats it as a single codepoint. The regular expression must not contain NULL bytes. If the haystack or the pattern are not valid UTF-8, the behavior is undefined.

Unlike re2's default behavior, . matches line breaks. To disable this, prepend the pattern with (?-s).

The pattern is automatically anchored at both ends (as if the pattern started with '^' and ended with '$').

If you only like to find substrings, you can use functions like or position instead - they work much faster than this function.

Alternative operator syntax: haystack REGEXP pattern.

Syntax

match(haystack, pattern)

Aliases: REGEXP_MATCHES

Arguments

haystack — String in which the pattern is searched. String
pattern — Regular expression pattern. const String

Returned value

Returns 1 if the pattern matches, 0 otherwise. UInt8

Examples

Basic pattern matching

SELECT match('Hello World', 'Hello.*')

┌─match('Hello World', 'Hello.*')─┐
│                               1 │
└─────────────────────────────────┘

Pattern not matching

SELECT match('Hello World', 'goodbye.*')

┌─match('Hello World', 'goodbye.*')─┐
│                                 0 │
└───────────────────────────────────┘

multiFuzzyMatchAllIndices

Introduced in: v20.1

Like multiFuzzyMatchAny but returns the array of all indices in any order that match the haystack within a constant edit distance.

Syntax

multiFuzzyMatchAllIndices(haystack, distance, [pattern1, pattern2, ..., patternN])

Arguments

haystack — String in which the search is performed. String
distance — The maximum edit distance for fuzzy matching. UInt8
pattern — Array of patterns to match against. Array(String)

Returned value

Returns an array of all indices (starting from 1) that match the haystack within the specified edit distance in any order. Returns an empty array if no matches are found. Array(UInt64)

Examples

Usage example

SELECT multiFuzzyMatchAllIndices('ClickHouse', 2, ['ClickHouse', 'ClckHouse', 'ClickHose', 'House']);

┌─multiFuzzyMa⋯, 'House'])─┐
│ [3,1,4,2]                │
└──────────────────────────┘

multiFuzzyMatchAny

Introduced in: v20.1

Like multiMatchAny but returns 1 if any pattern matches the haystack within a constant edit distance. This function relies on the experimental feature of hyperscan library, and can be slow for some edge cases. The performance depends on the edit distance value and patterns used, but it's always more expensive compared to non-fuzzy variants.

Note

multiFuzzyMatch*() function family do not support UTF-8 regular expressions (it treats them as a sequence of bytes) due to restrictions of hyperscan.

Syntax

multiFuzzyMatchAny(haystack, distance, [pattern1, pattern2, ..., patternN])

Arguments

haystack — String in which the search is performed. String
distance — The maximum edit distance for fuzzy matching. UInt8
pattern — Optional. An array of patterns to match against. Array(String)

Returned value

Returns 1 if any pattern matches the haystack within the specified edit distance, otherwise 0. UInt8

Examples

Usage example

SELECT multiFuzzyMatchAny('ClickHouse', 2, ['ClickHouse', 'ClckHouse', 'ClickHose']);

┌─multiFuzzyMa⋯lickHose'])─┐
│                        1 │
└──────────────────────────┘

multiFuzzyMatchAnyIndex

Introduced in: v20.1

Like multiFuzzyMatchAny but returns any index that matches the haystack within a constant edit distance.

Syntax

multiFuzzyMatchAnyIndex(haystack, distance, [pattern1, pattern2, ..., patternn])

Arguments

haystack — String in which the search is performed. String
distance — The maximum edit distance for fuzzy matching. UInt8
pattern — Array of patterns to match against. Array(String)

Returned value

Returns the index (starting from 1) of any pattern that matches the haystack within the specified edit distance, otherwise 0. UInt64

Examples

Usage example

SELECT multiFuzzyMatchAnyIndex('ClickHouse', 2, ['ClckHouse', 'ClickHose', 'ClickHouse']);

┌─multiFuzzyMa⋯ickHouse'])─┐
│                        2 │
└──────────────────────────┘

multiMatchAllIndices

Introduced in: v20.1

Like multiMatchAny but returns the array of all indices that match the haystack in any order.

Syntax

multiMatchAllIndices(haystack, [pattern1, pattern2, ..., patternn])

Arguments

haystack — String in which the search is performed. String
pattern — Regular expressions to match against. String

Returned value

Array of all indices (starting from 1) that match the haystack in any order. Returns an empty array if no matches are found. Array(UInt64)

Examples

Usage example

SELECT multiMatchAllIndices('ClickHouse', ['[0-9]', 'House', 'Click', 'ouse']);

┌─multiMatchAl⋯', 'ouse'])─┐
│ [3, 2, 4]                │
└──────────────────────────┘

multiMatchAny

Introduced in: v20.1

Check if at least one of multiple regular expression patterns matches a haystack.

If you only want to search multiple substrings in a string, you can use function multiSearchAny instead - it works much faster than this function.

Syntax

multiMatchAny(haystack, pattern1[, pattern2, ...])

Arguments

haystack — String in which patterns are searched. String
pattern1[, pattern2, ...] — An array of one or more regular expression patterns. Array(String)

Returned value

Returns 1 if any pattern matches, 0 otherwise. UInt8

Examples

Multiple pattern matching

SELECT multiMatchAny('Hello World', ['Hello.*', 'foo.*'])

┌─multiMatchAny('Hello World', ['Hello.*', 'foo.*'])─┐
│                                                  1 │
└────────────────────────────────────────────────────┘

No patterns match

SELECT multiMatchAny('Hello World', ['goodbye.*', 'foo.*'])

┌─multiMatchAny('Hello World', ['goodbye.*', 'foo.*'])─┐
│                                                    0 │
└──────────────────────────────────────────────────────┘

multiMatchAnyIndex

Introduced in: v20.1

Like multiMatchAny but returns any index that matches the haystack.

Syntax

multiMatchAnyIndex(haystack, [pattern1, pattern2, ..., patternn])

Arguments

haystack — String in which the search is performed. String
pattern — Regular expressions to match against. Array(String)

Returned value

Returns the index (starting from 1) of the first pattern that matches, or 0 if no match is found. UInt64

Examples

Usage example

SELECT multiMatchAnyIndex('ClickHouse', ['[0-9]', 'House', 'Click']);

┌─multiMatchAn⋯, 'Click'])─┐
│                        3 │
└──────────────────────────┘

multiSearchAllPositions

Introduced in: v20.1

Like position but returns an array of positions (in bytes, starting at 1) for multiple needle substrings in a haystack string.

All multiSearch*() functions only support up to 2^8 needles.

Syntax

multiSearchAllPositions(haystack, needle1[, needle2, ...])

Arguments

haystack — String in which the search is performed. String
needle1[, needle2, ...] — An array of one or more substrings to be searched. Array(String)

Returned value

Returns array of the starting position in bytes and counting from 1, if the substring was found, 0, if the substring was not found. Array(UInt64)

Examples

Multiple needle search

SELECT multiSearchAllPositions('Hello, World!', ['hello', '!', 'world'])

┌─multiSearchAllPositions('Hello, World!', ['hello', '!', 'world'])─┐
│ [0,13,0]                                                          │
└───────────────────────────────────────────────────────────────────┘

multiSearchAllPositionsCaseInsensitive

Introduced in: v20.1

Like multiSearchAllPositions but ignores case.

Syntax

multiSearchAllPositionsCaseInsensitive(haystack, needle1[, needle2, ...])

Arguments

haystack — String in which the search is performed. String
needle1[, needle2, ...] — An array of one or more substrings to be searched. Array(String)

Returned value

Returns array of the starting position in bytes and counting from 1 (if the substring was found), 0 if the substring was not found. Array(UInt64)

Examples

Case insensitive multi-search

SELECT multiSearchAllPositionsCaseInsensitive('ClickHouse',['c','h'])

┌─multiSearchA⋯['c', 'h'])─┐
│ [1,6]                    │
└──────────────────────────┘

multiSearchAllPositionsCaseInsensitiveUTF8

Introduced in: v20.1

Like multiSearchAllPositionsUTF8 but ignores case.

Syntax

multiSearchAllPositionsCaseInsensitiveUTF8(haystack, [needle1, needle2, ..., needleN])

Arguments

haystack — UTF-8 encoded string in which the search is performed. String
needle — UTF-8 encoded substrings to be searched. Array(String)

Returned value

Array of the starting position in bytes and counting from 1 (if the substring was found). Returns 0 if the substring was not found. Array

Examples

Case-insensitive UTF-8 search

SELECT multiSearchAllPositionsCaseInsensitiveUTF8('Здравствуй, мир!', ['здравствуй', 'МИР']);

┌─multiSearchA⋯й', 'МИР'])─┐
│ [1, 13]                  │
└──────────────────────────┘

multiSearchAllPositionsUTF8

Introduced in: v20.1

Like multiSearchAllPositions but assumes haystack and the needle substrings are UTF-8 encoded strings.

Syntax

multiSearchAllPositionsUTF8(haystack, needle1[, needle2, ...])

Arguments

haystack — UTF-8 encoded string in which the search is performed. String
needle1[, needle2, ...] — An array of UTF-8 encoded substrings to be searched. Array(String)

Returned value

Returns array of the starting position in bytes and counting from 1 (if the substring was found), 0 if the substring was not found. Array

Examples

UTF-8 multi-search

SELECT multiSearchAllPositionsUTF8('ClickHouse',['C','H'])

┌─multiSearchAllPositionsUTF8('ClickHouse', ['C', 'H'])─┐
│ [1,6]                                                 │
└───────────────────────────────────────────────────────┘

multiSearchAny

Introduced in: v20.1

Checks if at least one of a number of needle strings matches the haystack string.

Functions multiSearchAnyCaseInsensitive, multiSearchAnyUTF8 and multiSearchAnyCaseInsensitiveUTF8 provide case-insensitive and/or UTF-8 variants of this function.

Syntax

multiSearchAny(haystack, needle1[, needle2, ...])

Arguments

haystack — String in which the search is performed. String
needle1[, needle2, ...] — An array of substrings to be searched. Array(String)

Returned value

Returns 1, if there was at least one match, otherwise 0, if there was not at least one match. UInt8

Examples

Any match search

SELECT multiSearchAny('ClickHouse',['C','H'])

┌─multiSearchAny('ClickHouse', ['C', 'H'])─┐
│                                        1 │
└──────────────────────────────────────────┘

multiSearchAnyCaseInsensitive

Introduced in: v20.1

Like multiSearchAny but ignores case.

Syntax

multiSearchAnyCaseInsensitive(haystack, [needle1, needle2, ..., needleN])

Arguments

haystack — String in which the search is performed. String
needle — Substrings to be searched. Array(String)

Returned value

Returns 1, if there was at least one case-insensitive match, otherwise 0, if there was not at least one case-insensitive match. UInt8

Examples

Case insensitive search

SELECT multiSearchAnyCaseInsensitive('ClickHouse',['c','h'])

┌─multiSearchAnyCaseInsensitive('ClickHouse', ['c', 'h'])─┐
│                                                       1 │
└─────────────────────────────────────────────────────────┘

multiSearchAnyCaseInsensitiveUTF8

Introduced in: v20.1

Like multiSearchAnyUTF8 but ignores case.

Syntax

multiSearchAnyCaseInsensitiveUTF8(haystack, [needle1, needle2, ..., needleN])

Arguments

haystack — UTF-8 string in which the search is performed. String
needle — UTF-8 substrings to be searched. Array(String)

Returned value

Returns 1, if there was at least one case-insensitive match, otherwise 0, if there was not at least one case-insensitive match. UInt8

Examples

Given a UTF-8 string 'Здравствуйте', check if character 'з' (lowercase) is present

SELECT multiSearchAnyCaseInsensitiveUTF8('Здравствуйте',['з'])

┌─multiSearchA⋯те', ['з'])─┐
│                        1 │
└──────────────────────────┘

multiSearchAnyUTF8

Introduced in: v20.1

Like multiSearchAny but assumes haystack and the needle substrings are UTF-8 encoded strings.

Syntax

multiSearchAnyUTF8(haystack, [needle1, needle2, ..., needleN])

Arguments

haystack — UTF-8 string in which the search is performed. String
needle — UTF-8 substrings to be searched. Array(String)

Returned value

Returns 1, if there was at least one match, otherwise 0, if there was not at least one match. UInt8

Examples

Given '你好，世界' ('Hello, world') as a UTF-8 string, check if there are any 你 or 界 characters in the string

SELECT multiSearchAnyUTF8('你好，世界', ['你', '界'])

┌─multiSearchA⋯你', '界'])─┐
│                        1 │
└──────────────────────────┘

multiSearchFirstIndex

Introduced in: v20.1

Searches for multiple needle strings in a haystack string (case-sensitive) and returns the 1-based index of the first needle found.

Syntax

multiSearchFirstIndex(haystack, [needle1, needle2, ..., needleN])

Arguments

haystack — The string to search in. String
needles — Array of strings to search for. Array(String)

Returned value

Returns the 1-based index (position in the needles array) of the first needle found in the haystack. Returns 0 if no needles are found. The search is case-sensitive. UInt64

Examples

Usage example

SELECT multiSearchFirstIndex('ClickHouse Database', ['Click', 'Database', 'Server']);

┌─multiSearchF⋯ 'Server'])─┐
│                        1 │
└──────────────────────────┘

Case-sensitive behavior

SELECT multiSearchFirstIndex('ClickHouse Database', ['CLICK', 'Database', 'Server']);

┌─multiSearchF⋯ 'Server'])─┐
│                        2 │
└──────────────────────────┘

No match found

SELECT multiSearchFirstIndex('Hello World', ['goodbye', 'test']);

┌─multiSearchF⋯', 'test'])─┐
│                        0 │
└──────────────────────────┘

multiSearchFirstIndexCaseInsensitive

Introduced in: v20.1

Returns the index i (starting from 1) of the leftmost found needle_i in the string haystack and 0 otherwise. Ignores case.

Syntax

multiSearchFirstIndexCaseInsensitive(haystack, [needle1, needle2, ..., needleN]

Arguments

haystack — String in which the search is performed. String
needle — Substrings to be searched. Array(String)

Returned value

Returns the index (starting from 1) of the leftmost found needle. Otherwise 0, if there was no match. UInt8

Examples

Usage example

SELECT multiSearchFirstIndexCaseInsensitive('hElLo WoRlD', ['World', 'Hello']);

┌─multiSearchF⋯, 'Hello'])─┐
│                        1 │
└──────────────────────────┘

multiSearchFirstIndexCaseInsensitiveUTF8

Introduced in: v20.1

Searches for multiple needle strings in a haystack string, case-insensitively with UTF-8 encoding support, and returns the 1-based index of the first needle found.

Syntax

multiSearchFirstIndexCaseInsensitiveUTF8(haystack, [needle1, needle2, ..., needleN])

Arguments

haystack — The string to search in. String
needles — Array of strings to search for. Array(String)

Returned value

Returns the 1-based index (position in the needles array) of the first needle found in the haystack. Returns 0 if no needles are found. The search is case-insensitive and respects UTF-8 character encoding. UInt64

Examples

Usage example

SELECT multiSearchFirstIndexCaseInsensitiveUTF8('ClickHouse Database', ['CLICK', 'data', 'server']);

┌─multiSearchF⋯ 'server'])─┐
│                        1 │
└──────────────────────────┘

UTF-8 case handling

SELECT multiSearchFirstIndexCaseInsensitiveUTF8('Привет Мир', ['мир', 'ПРИВЕТ']);

┌─multiSearchF⋯ 'ПРИВЕТ'])─┐
│                        1 │
└──────────────────────────┘

No match found

SELECT multiSearchFirstIndexCaseInsensitiveUTF8('Hello World', ['goodbye', 'test']);

┌─multiSearchF⋯', 'test'])─┐
│                        0 │
└──────────────────────────┘

multiSearchFirstIndexUTF8

Introduced in: v20.1

Returns the index i (starting from 1) of the leftmost found needle_i in the string haystack and 0 otherwise. Assumes haystack and needle are UTF-8 encoded strings.

Syntax

multiSearchFirstIndexUTF8(haystack, [needle1, needle2, ..., needleN])

Arguments

haystack — UTF-8 string in which the search is performed. String
needle — Array of UTF-8 substrings to be searched. Array(String)

Returned value

Returns the index (starting from 1) of the leftmost found needle. Otherwise 0, if there was no match. UInt8

Examples

Usage example

SELECT multiSearchFirstIndexUTF8('Здравствуйте мир', ['мир', 'здравствуйте']);

┌─multiSearchF⋯вствуйте'])─┐
│                        1 │
└──────────────────────────┘

multiSearchFirstPosition

Introduced in: v20.1

Like position but returns the leftmost offset in a haystack string which matches any of multiple needle strings.

Functions multiSearchFirstPositionCaseInsensitive, multiSearchFirstPositionUTF8 and multiSearchFirstPositionCaseInsensitiveUTF8 provide case-insensitive and/or UTF-8 variants of this function.

Syntax

multiSearchFirstPosition(haystack, needle1[, needle2, ...])

Arguments

haystack — String in which the search is performed. String
needle1[, needle2, ...] — An array of one or more substrings to be searched. Array(String)

Returned value

Returns the leftmost offset in a haystack string which matches any of multiple needle strings, otherwise 0, if there was no match. UInt64

Examples

First position search

SELECT multiSearchFirstPosition('Hello World',['llo', 'Wor', 'ld'])

┌─multiSearchFirstPosition('Hello World', ['llo', 'Wor', 'ld'])─┐
│                                                             3 │
└───────────────────────────────────────────────────────────────┘

multiSearchFirstPositionCaseInsensitive

Introduced in: v20.1

Like multiSearchFirstPosition but ignores case.

Syntax

multiSearchFirstPositionCaseInsensitive(haystack, [needle1, needle2, ..., needleN])

Arguments

haystack — String in which the search is performed. String
needle — Array of substrings to be searched. Array(String)

Returned value

Returns the leftmost offset in a haystack string which matches any of multiple needle strings. Returns 0, if there was no match. UInt64

Examples

Case insensitive first position

SELECT multiSearchFirstPositionCaseInsensitive('HELLO WORLD',['wor', 'ld', 'ello'])

┌─multiSearchFirstPositionCaseInsensitive('HELLO WORLD', ['wor', 'ld', 'ello'])─┐
│                                                                             2 │
└───────────────────────────────────────────────────────────────────────────────┘

multiSearchFirstPositionCaseInsensitiveUTF8

Introduced in: v20.1

Like multiSearchFirstPosition but assumes haystack and needle to be UTF-8 strings and ignores case.

Syntax

multiSearchFirstPositionCaseInsensitiveUTF8(haystack, [needle1, needle2, ..., needleN])

Arguments

haystack — UTF-8 string in which the search is performed. String
needle — Array of UTF-8 substrings to be searched. Array(String)

Returned value

Returns the leftmost offset in a haystack string which matches any of multiple needle strings, ignoring case. Returns 0, if there was no match. UInt64

Examples

Find the leftmost offset in UTF-8 string 'Здравствуй, мир' ('Hello, world') which matches any of the given needles

SELECT multiSearchFirstPositionCaseInsensitiveUTF8('Здравствуй, мир', ['МИР', 'вст', 'Здра'])

┌─multiSearchFirstPositionCaseInsensitiveUTF8('Здравствуй, мир', ['мир', 'вст', 'Здра'])─┐
│                                                                                      3 │
└────────────────────────────────────────────────────────────────────────────────────────┘

multiSearchFirstPositionUTF8

Introduced in: v20.1

Like multiSearchFirstPosition but assumes haystack and needle to be UTF-8 strings.

Syntax

multiSearchFirstPositionUTF8(haystack, [needle1, needle2, ..., needleN])

Arguments

haystack — UTF-8 string in which the search is performed. String
needle — Array of UTF-8 substrings to be searched. Array(String)

Returned value

Leftmost offset in a haystack string which matches any of multiple needle strings. Returns 0, if there was no match. UInt64

Examples

Find the leftmost offset in UTF-8 string 'Здравствуй, мир' ('Hello, world') which matches any of the given needles

SELECT multiSearchFirstPositionUTF8('Здравствуй, мир',['мир', 'вст', 'авст'])

┌─multiSearchFirstPositionUTF8('Здравствуй, мир', ['мир', 'вст', 'авст'])─┐
│                                                                       3 │
└─────────────────────────────────────────────────────────────────────────┘

ngramDistance

Introduced in: v20.1

Calculates the 4-gram distance between two strings. For this, it counts the symmetric difference between two multisets of 4-grams and normalizes it by the sum of their cardinalities. The smaller the returned value, the more similar the strings are.

For case-insensitive search or/and in UTF8 format use functions ngramDistanceCaseInsensitive, ngramDistanceUTF8, ngramDistanceCaseInsensitiveUTF8.

Syntax

ngramDistance(haystack, needle)

Arguments

haystack — String for comparison. String
needle — String for comparison. String

Returned value

Returns a Float32 number between 0 and 1. The smaller the returned value, the more similar the strings are. Float32

Examples

Calculate 4-gram distance

SELECT ngramDistance('ClickHouse', 'ClickHouses')

┌─ngramDistance('ClickHouse', 'ClickHouses')─┐
│                                        0.1 │
└────────────────────────────────────────────┘

ngramDistanceCaseInsensitive

Introduced in: v20.1

Provides a case-insensitive variant of ngramDistance. Calculates the 4-gram distance between two strings, ignoring case. The smaller the returned value, the more similar the strings are.

Syntax

ngramDistanceCaseInsensitive(haystack, needle)

Arguments

haystack — First comparison string. String
needle — Second comparison string. String

Returned value

Returns a Float32 number between 0 and 1. Float32

Examples

Case-insensitive 4-gram distance

SELECT ngramDistanceCaseInsensitive('ClickHouse','clickhouse')

┌─ngramDistanceCaseInsensitive('ClickHouse','clickhouse')─┐
│                                                       0 │
└─────────────────────────────────────────────────────────┘

ngramDistanceCaseInsensitiveUTF8

Introduced in: v20.1

Provides a case-insensitive UTF-8 variant of ngramDistance. Assumes that needle and haystack strings are UTF-8 encoded strings and ignores case. Calculates the 3-gram distance between two UTF-8 strings, ignoring case. The smaller the returned value, the more similar the strings are.

Syntax

ngramDistanceCaseInsensitiveUTF8(haystack, needle)

Arguments

haystack — First UTF-8 encoded comparison string. String
needle — Second UTF-8 encoded comparison string. String

Returned value

Returns a Float32 number between 0 and 1. Float32

Examples

Case-insensitive UTF-8 3-gram distance

SELECT ngramDistanceCaseInsensitiveUTF8('abcde','CDE')

┌─ngramDistanceCaseInsensitiveUTF8('abcde','CDE')─┐
│                                             0.5 │
└─────────────────────────────────────────────────┘

ngramDistanceUTF8

Introduced in: v20.1

Provides a UTF-8 variant of ngramDistance. Assumes that needle and haystack strings are UTF-8 encoded strings. Calculates the 3-gram distance between two UTF-8 strings. The smaller the returned value, the more similar the strings are.

Syntax

ngramDistanceUTF8(haystack, needle)

Arguments

haystack — First UTF-8 encoded comparison string. String
needle — Second UTF-8 encoded comparison string. String

Returned value

Returns a Float32 number between 0 and 1. Float32

Examples

UTF-8 3-gram distance

SELECT ngramDistanceUTF8('abcde','cde')

┌─ngramDistanceUTF8('abcde','cde')─┐
│                               0.5 │
└───────────────────────────────────┘

ngramSearch

Introduced in: v20.1

Checks if the 4-gram distance between two strings is less than or equal to a given threshold.

For case-insensitive search or/and in UTF8 format use functions ngramSearchCaseInsensitive, ngramSearchUTF8, ngramSearchCaseInsensitiveUTF8.

Syntax

ngramSearch(haystack, needle)

Arguments

haystack — String for comparison. String
needle — String for comparison. String

Returned value

Returns 1 if the 4-gram distance between the strings is less than or equal to a threshold (1.0 by default), 0 otherwise. UInt8

Examples

Search using 4-grams

SELECT ngramSearch('ClickHouse', 'Click')

┌─ngramSearch('ClickHouse', 'Click')─┐
│                                  1 │
└────────────────────────────────────┘

ngramSearchCaseInsensitive

Introduced in: v20.1

Provides a case-insensitive variant of ngramSearch. Calculates the non-symmetric difference between a needle string and a haystack string, i.e. the number of n-grams from the needle minus the common number of n-grams normalized by the number of needle n-grams. Checks if the 4-gram distance between two strings is less than or equal to a given threshold, ignoring case.

Syntax

ngramSearchCaseInsensitive(haystack, needle)

Arguments

haystack — String for comparison. String
needle — String for comparison. String

Returned value

Returns 1 if the 4-gram distance between the strings is less than or equal to a threshold (1.0 by default), 0 otherwise. UInt8

Examples

Case-insensitive search using 4-grams

SELECT ngramSearchCaseInsensitive('Hello World','hello')

┌─ngramSearchCaseInsensitive('Hello World','hello')─┐
│                                                  1 │
└────────────────────────────────────────────────────┘

ngramSearchCaseInsensitiveUTF8

Introduced in: v20.1

Provides a case-insensitive UTF-8 variant of ngramSearch. Assumes haystack and needle to be UTF-8 strings and ignores case. Checks if the 3-gram distance between two UTF-8 strings is less than or equal to a given threshold, ignoring case.

Syntax

ngramSearchCaseInsensitiveUTF8(haystack, needle)

Arguments

haystack — UTF-8 string for comparison. String
needle — UTF-8 string for comparison. String

Returned value

Returns 1 if the 3-gram distance between the strings is less than or equal to a threshold (1.0 by default), 0 otherwise. UInt8

Examples

Case-insensitive UTF-8 search using 3-grams

SELECT ngramSearchCaseInsensitiveUTF8('абвГДЕёжз', 'АбвгдЕЁжз')

┌─ngramSearchCaseInsensitiveUTF8('абвГДЕёжз', 'АбвгдЕЁжз')─┐
│                                                        1 │
└──────────────────────────────────────────────────────────┘

ngramSearchUTF8

Introduced in: v20.1

Provides a UTF-8 variant of ngramSearch. Assumes haystack and needle to be UTF-8 strings. Checks if the 3-gram distance between two UTF-8 strings is less than or equal to a given threshold.

Syntax

ngramSearchUTF8(haystack, needle)

Arguments

haystack — UTF-8 string for comparison. String
needle — UTF-8 string for comparison. String

Returned value

Returns 1 if the 3-gram distance between the strings is less than or equal to a threshold (1.0 by default), 0 otherwise. UInt8

Examples

UTF-8 search using 3-grams

SELECT ngramSearchUTF8('абвгдеёжз', 'гдеёзд')

┌─ngramSearchUTF8('абвгдеёжз', 'гдеёзд')─┐
│                                      1 │
└────────────────────────────────────────┘

notILike

Introduced in: v20.6

Checks whether a string does not match a pattern, case-insensitive. The pattern can contain special characters % and _ for SQL LIKE matching.

Syntax

notILike(haystack, pattern)

Arguments

haystack — The input string to search in. String or FixedString
pattern — The SQL LIKE pattern to match against. % matches any number of characters (including zero), _ matches exactly one character. String

Returned value

Returns 1 if the string does not match the pattern (case-insensitive), otherwise 0. UInt8

Examples

Usage example

SELECT notILike('ClickHouse', '%house%');

┌─notILike('Cl⋯ '%house%')─┐
│                        0 │
└──────────────────────────┘

notLike

Introduced in: v1.1

Similar to like but negates the result.

Syntax

notLike(haystack, pattern)
-- haystack NOT LIKE pattern

Arguments

haystack — String in which the search is performed. String or FixedString
pattern — LIKE pattern to match against. String

Returned value

Returns 1 if the string does not match the LIKE pattern, otherwise 0. UInt8

Examples

Usage example

SELECT notLike('ClickHouse', '%House%');

┌─notLike('Cli⋯ '%House%')─┐
│                        0 │
└──────────────────────────┘

Non-matching pattern

SELECT notLike('ClickHouse', '%SQL%');

┌─notLike('Cli⋯', '%SQL%')─┐
│                        1 │
└──────────────────────────┘

position

Introduced in: v1.1

Returns the position (in bytes, starting at 1) of a substring needle in a string haystack.

If substring needle is empty, these rules apply:

if no start_pos was specified: return 1
if start_pos = 0: return 1
if start_pos >= 1 and start_pos <= length(haystack) + 1: return start_pos
otherwise: return 0

The same rules also apply to functions locate, positionCaseInsensitive, positionUTF8 and positionCaseInsensitiveUTF8.

Syntax

position(haystack, needle[, start_pos])

Arguments

haystack — String in which the search is performed. String or Enum
needle — Substring to be searched. String
start_pos — Position (1-based) in haystack at which the search starts. Optional. UInt

Returned value

Returns starting position in bytes and counting from 1, if the substring was found, otherwise 0, if the substring was not found. UInt64

Examples

Basic usage

SELECT position('Hello, world!', '!')

┌─position('Hello, world!', '!')─┐
│                             13 │
└────────────────────────────────┘

With start_pos argument

SELECT position('Hello, world!', 'o', 1), position('Hello, world!', 'o', 7)

┌─position('Hello, world!', 'o', 1)─┬─position('Hello, world!', 'o', 7)─┐
│                                 5 │                                 9 │
└───────────────────────────────────┴───────────────────────────────────┘

Needle IN haystack syntax

SELECT 6 = position('/' IN s) FROM (SELECT 'Hello/World' AS s)

┌─equals(6, position(s, '/'))─┐
│                           1 │
└─────────────────────────────┘

Empty needle substring

SELECT position('abc', ''), position('abc', '', 0), position('abc', '', 1), position('abc', '', 2), position('abc', '', 3), position('abc', '', 4), position('abc', '', 5)

┌─position('abc', '')─┬─position('abc', '', 0)─┬─position('abc', '', 1)─┬─position('abc', '', 2)─┬─position('abc', '', 3)─┬─position('abc', '', 4)─┬─position('abc', '', 5)─┐
│                   1 │                      1 │                      1 │                      2 │                      3 │                      4 │                      0 │
└─────────────────────┴────────────────────────┴────────────────────────┴────────────────────────┴────────────────────────┴────────────────────────┴────────────────────────┘

positionCaseInsensitive

Introduced in: v1.1

Like position but case-insensitive.

Syntax

positionCaseInsensitive(haystack, needle[, start_pos])

Aliases: instr

Arguments

haystack — String in which the search is performed. String or Enum
needle — Substring to be searched. String
start_pos — Optional. Position (1-based) in haystack at which the search starts. UInt*

Returned value

Returns starting position in bytes and counting from 1, if the substring was found, otherwise 0, if the substring was not found. UInt64

Examples

Case insensitive search

SELECT positionCaseInsensitive('Hello, world!', 'hello')

┌─positionCaseInsensitive('Hello, world!', 'hello')─┐
│                                                 1 │
└───────────────────────────────────────────────────┘

positionCaseInsensitiveUTF8

Introduced in: v1.1

Like positionUTF8 but searches case-insensitively.

Syntax

positionCaseInsensitiveUTF8(haystack, needle[, start_pos])

Arguments

haystack — String in which the search is performed. String or Enum
needle — Substring to be searched. String
start_pos — Optional. Position (1-based) in haystack at which the search starts. UInt*

Returned value

Returns starting position in bytes and counting from 1, if the substring was found, otherwise 0, if the substring was not found. UInt64

Examples

Case insensitive UTF-8 search

SELECT positionCaseInsensitiveUTF8('Привет мир', 'МИР')

┌─positionCaseInsensitiveUTF8('Привет мир', 'МИР')─┐
│                                                8 │
└──────────────────────────────────────────────────┘

positionUTF8

Introduced in: v1.1

Like position but assumes haystack and needle are UTF-8 encoded strings.

Syntax

positionUTF8(haystack, needle[, start_pos])

Arguments

haystack — String in which the search is performed. String or Enum
needle — Substring to be searched. String
start_pos — Optional. Position (1-based) in haystack at which the search starts. UInt*

Returned value

Returns starting position in bytes and counting from 1, if the substring was found, otherwise 0, if the substring was not found. UInt64

Examples

UTF-8 character counting

SELECT positionUTF8('Motörhead', 'r')

┌─position('Motörhead', 'r')─┐
│                          5 │
└────────────────────────────┘

regexpExtract

Introduced in: v

Extracts the first string in haystack that matches the regexp pattern and corresponds to the regex group index.

Syntax

Aliases: REGEXP_EXTRACT

Arguments

None.

Returned value

Examples

countMatches​

countMatchesCaseInsensitive​

countSubstrings​

countSubstringsCaseInsensitive​

countSubstringsCaseInsensitiveUTF8​

extract​

extractAll​

extractAllGroupsHorizontal​

extractGroups​

hasAllTokens​

hasAnyTokens​

hasSubsequence​

hasSubsequenceCaseInsensitive​

hasSubsequenceCaseInsensitiveUTF8​

hasSubsequenceUTF8​

hasToken​

hasTokenCaseInsensitive​

hasTokenCaseInsensitiveOrNull​

hasTokenOrNull​

ilike​

like​

locate​

match​

multiFuzzyMatchAllIndices​

multiFuzzyMatchAny​

multiFuzzyMatchAnyIndex​

multiMatchAllIndices​

multiMatchAny​

multiMatchAnyIndex​

multiSearchAllPositions​

multiSearchAllPositionsCaseInsensitive​

multiSearchAllPositionsCaseInsensitiveUTF8​

multiSearchAllPositionsUTF8​

multiSearchAny​

multiSearchAnyCaseInsensitive​

multiSearchAnyCaseInsensitiveUTF8​

multiSearchAnyUTF8​

multiSearchFirstIndex​

multiSearchFirstIndexCaseInsensitive​

multiSearchFirstIndexCaseInsensitiveUTF8​

multiSearchFirstIndexUTF8​

multiSearchFirstPosition​

multiSearchFirstPositionCaseInsensitive​

multiSearchFirstPositionCaseInsensitiveUTF8​

multiSearchFirstPositionUTF8​

ngramDistance​

ngramDistanceCaseInsensitive​

ngramDistanceCaseInsensitiveUTF8​

ngramDistanceUTF8​

ngramSearch​

ngramSearchCaseInsensitive​

ngramSearchCaseInsensitiveUTF8​

ngramSearchUTF8​

notILike​

notLike​

position​

positionCaseInsensitive​

positionCaseInsensitiveUTF8​

positionUTF8​

regexpExtract​

countMatches

countMatchesCaseInsensitive

countSubstrings

countSubstringsCaseInsensitive

countSubstringsCaseInsensitiveUTF8

extract

extractAll

extractAllGroupsHorizontal

extractGroups

hasAllTokens

hasAnyTokens

hasSubsequence

hasSubsequenceCaseInsensitive

hasSubsequenceCaseInsensitiveUTF8

hasSubsequenceUTF8

hasToken

hasTokenCaseInsensitive

hasTokenCaseInsensitiveOrNull

hasTokenOrNull

ilike

like

locate

match

multiFuzzyMatchAllIndices

multiFuzzyMatchAny

multiFuzzyMatchAnyIndex

multiMatchAllIndices

multiMatchAny

multiMatchAnyIndex

multiSearchAllPositions

multiSearchAllPositionsCaseInsensitive

multiSearchAllPositionsCaseInsensitiveUTF8

multiSearchAllPositionsUTF8

multiSearchAny

multiSearchAnyCaseInsensitive

multiSearchAnyCaseInsensitiveUTF8

multiSearchAnyUTF8

multiSearchFirstIndex

multiSearchFirstIndexCaseInsensitive

multiSearchFirstIndexCaseInsensitiveUTF8

multiSearchFirstIndexUTF8

multiSearchFirstPosition

multiSearchFirstPositionCaseInsensitive

multiSearchFirstPositionCaseInsensitiveUTF8

multiSearchFirstPositionUTF8

ngramDistance

ngramDistanceCaseInsensitive

ngramDistanceCaseInsensitiveUTF8

ngramDistanceUTF8

ngramSearch

ngramSearchCaseInsensitive

ngramSearchCaseInsensitiveUTF8

ngramSearchUTF8

notILike

notLike

position

positionCaseInsensitive

positionCaseInsensitiveUTF8

positionUTF8

regexpExtract